|
Welcome to our Customer Projects & Video Page
Please just scroll down the page or click on the banner below for the >> CUSTOMERS LATEST ADDITION |
|
Len Zanni,s
HAFCO Milling Machine (Australia) |
This machine is powered by our 4axis 20amp Servo System using the MCG 900oz.in peak Servo Motors
Len lives up in the far northern steamy tropics of Australia so a enviroment controlled room was justified for this project
One of the cleanest CNC layouts we have seen, using our equipment.
The above photo shows one of Len,s employees taking a hard earned rested break.....LOL
Nice installation job done on the MCG servo motors.
Notice the simplified quill adaption to the Z axis servo motor.
(Courtesy of Len Zanni NT, Australia)
PLASMA TABLE
|
Heavy Duty Oxy / Fuel Cutting Table
|
Below is a 8 x 4ft Plasma Table driven by a 7amp Extra Duty 1/10th micro step system.
(Courtesy of CNC Solutions Canada)
|
Surfs Up !!! ......3 axis Foam blank shaping table
|
A ballscrew driven Surf Board router machine, powered by one of our 3 axis / 7amp 1/10th microstep Extra Duty stepper systems with a 48vdc RapidPower Supply
Stepper motors used were the large 34 series / 1080oz.in MAE brand
(Courtesy of Raymond Guthierrez London, United Kingdom)
|
Another HAFCO Floor Mill Retrofit
Done here in AUSTRALIA |
A ballscrew driven Surf Board router machine, powered by one of our 3 axis / 7amp 1/10th microstep Extra Duty stepper systems with a 48vdc RapidPower Supply
Stepper motors used were the large 34 series / 1080oz.in MAE brand
HAFCO Floor Mill has just had the MYCOM stepper motors fitted.
All the bits lay here ready for a conversion of the above HAFCO Mill
Above photo shows the pulley to stepper motor adaption using RHS and plate steel.
(Courtesy of Tim Hutchins AUSTRALIA)
|
FRANS Router Table for the boat industry
|
This machine is powered by our 4axis 7amp Micro Stepping System using the REX 1200oz.in Stepper Motors
This table works around the clock making plywood kit boats trading as Cape Boat Works down in Canberra Australia
(Courtesy of Frans Wallscott Camberra AUSTRALIA)
|
Custom Chopper Parts
|
The Guys at Biglry Bones in California make top quality alloy custom bike parts using there old Shizuoka knee Mill
 |
 |
Here are some examples of what they do.
GO HERE >> http://biglry.com/
If your in there neighbourhood, besure to drop in and see them sometime, Larry,s a top guy to deal with.
BONE@Biglry.com
(Courtesy of Biglry Bones, California USA)
|
CNC in your workshop at home
|
Seen below is a chinese Milling machine driven by a Budget 2.5amp / 3axis system and 24vdc power supply.
(Courtesy of Michael Casey, California USA)
(Courtesy of Michael Casey, California USA)
8 x 4ft Router table with a silky smooth servo system
Seen below is a 8 x 4ft Router Table driven by a 20amp / 3axis (Closed Loop) servo system, powered by a 48vdc Rapid power supply.
Our controller and power supply were incorperated into there own all in one pedistal cabinet
Last Modified